1 DIMMER KIT Lutron’s in-wall dimmer with Pico remote control kit includes the model P-PKG1W-WH in-wall dimmer, the Pico
remote control and the Lutron Claro designer wallplate. The dimmer works with dimmable LEDs, CFLs, incandescent lamps and
halogen lamps and does not require a neutral wire. The remote, which is battery-powered, can be wall-mounted, handheld or placed
on a tabletop. The favorite button recalls a saved light level. The screwless wallplate matches the color of the switch and remote.
2 CONNECTOR ILSCO’s 1-hole standard tang ( Type ALNS), 2-hole standard tang (ALND) and narrow tang 1-hole and 2-hole
(ALNN) SureCrimp aluminum compression connectors are available in single-hole and double-hole tang configurations with a
variety of bolt-hole sizes and spacing. They are roll-marked to provide permanent product identification. Color-coded endcaps are
provided for accurate die identification.
3 SELF-RETRACTING DEVICE Dura Tech’s 10-ft. web self-retracting device has a glass-reinforced polycarbonate housing,
abrasion-resistant webbing and a fast-activating inertial brake system. Fit with a swiveling aluminum eye to reduce twisting and
available with a wide variety of steel or lightweight aluminum connectors, it has average arrest forces under 900 lbs. and a 44-in.
stopping distance. The internal brake eliminates the need for bulky external shock pack. It has an integral visual-load-impact indicator
and impact-resistant overmolded side walls and is available with multiple connector choices of both aluminum and steel.
4 LUMINAIRE Starfire’s Xenflex low-voltage linear luminaire conforms to architectural bends, turns, shapes and forms in any axis.
It is UL-listed and is available with Xenon gas-filled lamps or LED. Accessories include a valance, snap-in MR11 and MR16 modules,
diffusion lenses and reflectors.
5 SWITCH Tapeswitch Corp.’s CVP switching mat is designed for commercial control, signaling and counting applications. It uses
ribbon-switch technology, operating as a normally open switch that closes on contact and can be used to control relays, lights or
alarms from a low-voltage source and can function as a hidden switch when placed under carpeting or matting. It is flexible and
water-resistant, and only 5 lbs. of force is needed for operation.
6 LAMP ELB Electronics’ dimmable LED T8 direct replacement lamp for existing fluorescent T8 (32W) and T12 (32W and 40W)
electronic and magnetic-ballasted fixtures requires no rewiring of the lighting fixture. The multi-operation LED—available in 2-,
3-, 4- or 5-ft. lengths with either a clear or frosted lens—works with multiple input sources such as T8 electronic instant start, T8
program start electronic and T12 magnetic ballasts. If the ballast fails, the LED lamp can still operate using an optional 120–277V
AC LED remote.