CONCRETE PIPE SLEEVE NON-METALLIC • VENTED FOR EASIER STACKABILITY
THE EASY, ECONOMICAL WAY TO SLEEVE THROUGH CONCRETE POURS!
Our Concrete Pipe Sleeves offer the economical way to sleeve
through a concrete pour so that cable and conduit
can run easily from one floor to the next.
They eliminate costly core drilling and permit
positioning of the hole prior to pouring concrete,
without the need to cut holes in the form.
Our concrete pipe sleeves attach with nails or screws.
• Stackable up to 23" for extra deep pours
• Vented to keep wet pipe sleeves from sticking together
• Available in multiple hole sizes: 1-1/2" • 2" • 3" • 4" • 5" • 6"
Made in USA
for 4" hole
After concrete sets
cut sleeve off,
flush with surface.
Insert conduit into sleeve.
1_ 2 ad CPS40_1/2 pg ad LPCG 4/11/14 10: 51 AM Page 1
Our UL/CSA Listed Box Extenders extend set back metal
or non-metallic electrical boxes up to 1-1/2".
Made of heavy-duty, non-conductive plastic, they level and
support the wiring device. Plus, there’s no need to tape the
sides of a receptacle to prevent arcing in a metal box.
Our newest box extender, the BE1X, has a slightly larger
flange that covers miscut wall material and accommodates
midi or maxi cover plates.
It costs the same as our
‘regular’ single gang BE1
so if you normally use a
midi plate this is the
box extender for you!
• Complies with NEC 2014 (314.20) for set back boxes
• 2-hour fire rating
• In single and multiple gangs;
and round for round or octagonal boxes
EXTEND SET BACK ELECTRICAL BOXES UP TO 1-1/2 INCHES
© Arlington Industries, Inc. Patented
Made in USA
Larger Flange on
1_2p BE1 vs BE1X_1/2 pg ad LPCG 8/5/14 12: 34 PM Page 1