29 TRANSFORMER Hammond Power Solutions’ Sentinel G
general purpose distribution transformer supplies appliance,
lighting, heating, motorized machine and power loads from
electrical distribution systems. It is rated for less than 600V,
15–333 kVA single-phase and 15–1,500 kVA three-phase. It is
designed for use at 60 Hz and available in copper and aluminum.
30 VAN STORAGE SYSTEM Adrian Steel’s Lock ‘n Latch van
storage system provides a choice of drawers open, drawers
retained or drawers locked in position. Drawers are made of an
engineered composite material with heavy-duty drawer glides
for support. Drawers and glides can be repositioned within the
cabinet for increased storage flexibility. Two-, three- and four-drawer models are available.
31 FISH TAPE Greenlee, a Textron Co.’s, FTFS439-100, 100-ft.
flexible steel fish tape has a multistrand 3/16-in. round steel cable,
a comfort grip handle, a plastic winder case, a viewing port that
allows the user to see the remaining tape, and a flared case with
grip ridges to prevent slipping.
32 LAMP Keystone Technologies’ DirectDrive HiCRI LED tube
lamp eliminates the need for an external driver or ballast. For
new construction installations, users connect the 120–277V line
voltage directly to the sockets. For retrofit installations, users
bypass the existing ballast by cutting the wires and connecting
the 120–277V line voltage directly to the sockets. It has a 90+
CRI, contains no mercury, is made of shatterproof glass and is
designed for dry and damp locations.
25 CABLE RACK Underground Devices’ nonconductive,
nonmetallic cable rack is molded from glass-reinforced polymer
and is designed to never rust or corrode. Grounding, bonding
and insulators are not necessary. It is available in 3–20-in. arm
lengths with load capacities from 250–450 lbs.
26 FAN Larson Electronics’ EPF-30-PT explosion-proof fan creates
more than 8,000 CFM of air output and spins at 1,140 rpm. It has a
powder-coated steel guard, a cast aluminum junction box and an
adjustable 270-degree swivel bracket. To prevent explosions, it is
constructed with nonsparking blades and a thermally protected,
maintenance-free, ¼-hp motor. It is rated for use in hazardous
locations where flammable or explosive vapors, gases or dusts
exist and is designed to be pole-mounted.
27 CONNECTOR Bridgeport Fittings’ MCH-200 2-in., stainless-steel-alloy ground fitting is listed for use in wet and dry locations
as a connector for rigid metal conduit or EMT with a Bridgeport
Fittings connector. It can be used to bond rigid metallic
raceways at the enclosure and at the end of the bonding
conductor raceway. It is suitable for direct burial and provides a
wet locations seal.
28 STRIPPER Platinum Tools’“Big Red” BR1 cable and wire
stripper/cutter is designed for most cable types/sizes in the
voice, data and video field. It has preset coaxial cassette blade,
cutter for both cable and wire conductors, and a Velcro braid
comb for folding the braid back over the cable jacket. It is
adjustable for twisted-pair and audio cables.