5 LUMINAIRE Lutron Electronics’ Ivalo Lumaris linear LED
luminaire is designed for tight applications including coves,
under cabinets, shelves and counters. It can be surface-mounted or mounted with a 30/60-degree angle bracket. It
has a 90 CRI and is available in 2,700, 3,000 and 3,500K color
temperatures. It is 1¼ in. wide and comes in 6-, 12-, 18-, 24-, 36-
or 48-in. lengths.
6 RECEPTACLE COVER Orbit Industries’ nonmetallic
weatherproof cover is made with impact-resistant,
thermoplastic and has a pre-installed adhesive gasket and a
padlockable design. One-gang covers are available in 2¾-in.-
deep and a 3½-in.-deep models. Both feature 14 different device
configurations. A 3½ in. deep, two-gang cover is also available
and features 31 different device configurations.
7 SCREWDRIVER Jonard Tools’ SD-00/10 screwdriver has a
No. 00 Phillips tip and a 3-mm-diameter and 60-mm-long shaft
made from SU11 steel. The handle is made from polypropylene
and thermoplastic rubber with a swivel at the end for ease of
use. It is 6 in. long.
8 ENCLOSURE AIR CONDITIONER AutomationDirect’s
Stratus TA20-0 enclosure air conditioner fits 7- or 8-in.-deep
enclosures with flat sides. It is made from 16-gauge cold-rolled
steel, comes with a precut mounting gasket, and has gray
polyester powder coating inside and out and dual condenser
coils. It is available in NEMA 4, 4X and 12 ratings, and 120V AC
and 48V DC voltages.
1 CONDUIT SLEEVE Conduit sleeve Stub-EASE conduit
stub-ups, distributed by Emergent Safety Supply, keeps conduit
extensions from projecting beyond the top of a concrete
slab. Made of high-density polyethylene, the sleeve can be
attached to embedded conduit with a threaded coupling.
After installation, the sleeve and support are cut down to the
concrete slab until the raceway is ready to be extended into a
wall cavity. The embedded, threaded coupling sleeve can be
exposed using a driver with a standard paddle bit on the plastic
partition wall in the middle of the sleeve.
2 CABLE REELS Magnetek Inc.’s cable reels are designed to be
mounted on moving machinery and used to supply power for
the automatic winding of flexible power or control cables. Five
sizes, spring-driven or motorized electric options and slip ring
assemblies are available.
3 LUMINAIRE Eye Lighting’s Lambda high-bay LED luminaire
is designed to replace 400W HID. It features a die-cast
magnesium- alloy main housing with an extruded aluminum
driver housing. It is suitable for – 30–45°C ambient conditions
and produces an average of 24,000 lumens at 215W.
4 UTILITY CUT TER Milwaukee Tool’s M18 Force Logic 9T
utility cutter features a self-latching jaw that enables users to
open the jaw with one hand, even while wearing Class 3 gloves.
Wire automatically closes the jaw, providing hands-free jaw
closure and mid-span cuts. It weighs under 12 lbs. and has a red
lithium XC 5.0 battery, designed to provide 200 cuts per charge.