SNAP2IT® CONNECTORS NO TOOLS • EASY SNAP-IN INSTALLATION SAVES TIME!
FOR RETROFIT INSTALLATIONS
Arlington’s new one-piece RETROFIT SNAP2IT® fittings are
easy to use in an OLD WORK installation, and handle the
widest variety of cables! They’re ideal for adding additional
circuits to a load center. And you get the same labor-savings
in a retrofit installation!
Easy snap-in installation - NO TOOLS. Install connector into the
knockout in an existing box, pulling cable/conduit through the
knockout. Slip the fitting onto the cable,
then snap the assembly into the box.
That’s it...a secure installation
with no pullout.
Widest total cable ranges;
Widest variety of cables 14/2 to 10/3
AC, MC, HCF, MC continuous corrugated
aluminum cable, MCI-A cables (steel and
aluminum), AC90, ACG90 and FLEX
pending Made in USA
onto installed MC cable.
into box. Done!
1_ 2 ad 38RAST_1/2 pg ad LPCG 1/14/15 12: 24 PM Page 1
EASY TO INSTALL ON ANY SIDING TYPE
Our one-piece FS8091F
outlet box is your best buy
for a fast, easy device
installation on siding.
• Works with all
• Installs on any siding,
before or after it’s up
• For use where a
cover is not required –
cover for wet locations
Made in USA
1_4pg FS8091F_EMT 1/4 pg 9/05 7/25/14 2: 50 PM Page 1