Made in USA
Arlington’s new fan/fixture Mounting Box has an installed
steel mounting bracket that’ll save time and money in
new construction box installations. Forget searching for
a wooden 2x4 to cut and attach the box to! This 16" long
bracket takes its place. Plus, it’s pre-drilled for screws and
the ends are angled for easy fitting.
FBB900 for cathedral ceilings installs next to a rafter
for easy centering. Taller sides on the box allow it to fit
ceiling angles greater than 80°.
• No loose parts. Captive
installation screws. Installed
steel mounting bracket.
• 14. 5 cubic inch box with 8"
square mounting surface
for large fan canopies
• UL ratings:
70 lb fan, 200 lb fixture
CSA load ratings:
50 lb fan or fixture
Also available...FBB450 mounting box with installed 12"
steel mounting bracket – for sloped ceilings
FAN & FIXTURE
FOR CATHEDRAL CEILINGS IN NEW CONSTRUCTION
© 2015 Arlington Industries, Inc.
w/ installed steel
PROBLEM Patent pending
1_ 2 ad FBB900_1/2 pg ad LPCG 10/8/15 3:06 PM Page 1
70 lb fan/90 lb fixture at 24" oc
70 lb fan/150 lb fixture at 16" oc
CSA rated 50 lb fan/fixture at 16" and 24" 800/233-4717 Arlington
ADJUSTABLE BRACKET • FOR NEW CONSTRUCTION
FLUSH CEILING INSTALLATIONS
FAN FIXTURE BOX
Arlington’s heavy-duty, plated steel fan/fixture box
has an adjustable bracket that mounts securely
between joists spaced 16" to 24" o.c.
Flush ceiling installations
FBRS415 is designed for ceilings up to 1-1/4" thick.
For 1/2" ceilings, use the pre-bent positioning tab.
For other ceiling thicknesses, bend along the
appropriate score line.
• 15. 6 cu. inch box ships with captive screws,
mud cover, installed NM cable connector
installation screws Captive screws
ends to joists
for 1/2" ceilings
FBRS415 Patent pending Attach to joists, adjust box position
attach bracket ends
1_ 2 ad FBRS415_1/2 pg ad LPCG 6/10/13 12:07 PM Page 1