ELECTRICALCONTRACTOR | JUN. 16 | WWW.ECMAG.COM
8 NUT DRIVERS Klein Tools’ six-piece nut driver set includes 1/4-, 5/16-, 3/8-, 7/16-, 1/2- and 9/16-in. hex sizes and is designed for use on
threaded rods of any length. They have a through-handle, full-hollow shaft; wrench assist; a cushion-grip handle; and a magnetic tip that
holds nuts in place while fastening. They are color coded by size.
9 LASER RANGE METER Hilti’s PD-C laser range meter uses an integrated camera and laser module to take photographs. The meter
enables users to mark dimensions directly onto the photo. Users can document job sites, add comments and export data into a single
report. This meter has 4 GB of memory, a color touchscreen that can be used with work gloves, an integrated lithium-ion battery and a
10-hour battery life. It can store more than 3,000 measurements with pictures and measure up to 656 ft. with +/– 1 mm accuracy.
10 CLAMP ADAPTER General Tools’ FX3000 amp flex clamp adapter enables any clamp meter or multimeter to enclose thick or hard-to-reach conductors while increasing the meters’ AC current measurement to 3,000A. It has three full-scale ranges (0– 3,000A, 0–300, and
0–30A), a 6-ft. cable and an 18-in. probe that creates a 6-in. diameter loop.
11 UTILITY KNIFE Milwaukee Tool’s Fastback flip-utility knife with blade storage has a press-and-flip, one-handed opening. It can hold
five blades—one in the tool and four in the storage door. It has a 45-degree cut position, a gut hook, a wire-form clip and a wire stripper.
It is also available in a compact model, which is designed to fit in pockets, although it contains a standard-size utility blade.
12 PNEUMATIC SAW Esco Tool’s Millhog air-powered saw and track mount system is designed for scoring and trimming concrete
piling without damaging reinforcing bars. The saw has a 14-in. fiberglass-reinforced blade with a 5-in. cutting depth. The track mount
system clamps around a pile, and a trolley mounts onto the track to support the saw. It has stainless steel bands and is offered in 28 sizes
to fit piles from 6–60 in. in diameter.
13 NETWORK TESTER Ideal Networks’ Navi TEK NT network tester is designed to find and solve issues in copper and fiber optic cabling.
It detects services such as ISDN, POTS and PoE, and it performs wire mapping, including length measurement. A large built-in screen
displays test summaries and at-a-glance network summaries.
14 TABLE SAW Bosch’s Reaxx job site table saw is designed to reduce the risk of serious user injury. When the blade comes into contact
with human flesh, it drops below the tabletop. The system can be reset in less than 60 seconds, and two incidents can occur before a
replacement cartridge is needed. An LED display indicates saw status.