1 CABLE CUT TER Platinum Tools’ MCM racheted cable cutter, designed for one-handed operation, cuts stranded, flexible copper and
aluminum cable up to 500 MCM. It features ground-fixed and moving steel cutting blades. It also has ergonomic, nonslip handles; a
locking latch for safe storage; and a rust-resistant black oxide finish.
2 TOOL POUCH Veto Pro Pac’s TP3 tool pouch can clip onto the tape clip or D-rings of any Veto tool bag. It has 15 vertical tool pockets
(four inside and 11 outside), three long-shanked tool pockets, one meter pocket, two D-rings, a detachable rubber handle, a connection
clip and an 8-in. electrical tape strap.
3 TELESCOPING POLES Labor Saving Devices Inc.’s Grabbit Mini 10-foot, telescoping pole is made of nonconductive, shockproof,
friction-locking fiberglass and is designed for running wires and cables in limited-access areas and false ceilings. It has a snap-on light, a
J-tip for handling wire loops and metal fish tapes, and a Z-tip for grabbing wire. It also is available in 12- and 18-ft. models.
4 CRIMPER Dewalt’s DCE300 U-type died crimper is enabled with the built-in crimp-connect system, which reports and prints the date,
time, force and successfully completed crimp cycles as well as the tool’s calibration and service history. An LED panel powers the tool
on and off and indicates battery status, cycle completion and whether recalibration or service is needed. It has an LED work light and a
5 WORK LIGHT Baysco’s NSR-2166R multipurpose, rechargeable work light has a 230-lumen LED floodlight and a 32-lumen LED
spotlight in the base of the handle. A detachable magnetic hook can be attached in the middle of the handle or at the tip of the light
and rotated 360 degrees. The octagonal shape keeps the floodlight in place when laid on its side.
6 STRIPPING TOOL Greenlee’s GTS-1930 Saber stripping tool is designed to cut 600V secondary cable. It has a one-way barring handle and a 4-in. tension-grip depth stop. It also comes with a spring-loaded retention pin that allows for the
attachment of cable-specific bushings. Thirty-nine bushings are preset for specific cable diameters and jacket thicknesses.
7 AIR COMPRESSOR Hitachi Power Tools’ EC99S 4-gal., twin-stack air compressor has an oil-lubricated, cast-iron pump;
an ergonomic handle; steel-encased pressure gauges; and a 15A, direct-drive induction motor. It weighs less than 53 lbs.
and produces 3. 1 cfm at 90 psi and 3.05 cfm at 100 psi. It also has a ball valve drain cock, a protected pressure switch, shock
absorbing feet and a universal quick coupler.