888-ASK- 4ICC
icc.com csr@icc.com
Available at these Premise Cable Stocking Distributors:
24-Port, 1RMS 48-Port, 2 RMS 12-Port Wall Mount
With all these enhancements, ICC patch panels still cost 50% less than the big brands. If you are still paying for
big brands, we need to talk!
Are the patch panels TIA /ETL “Component-Rated?”
A component rating is a tougher standard than the “permanent link”
rating some manufacturers claim to have.
Are the patch panels FCC part 68 compliant?
FCC specifies 50 micro inch gold on contact. Every time you plug in, you shave
off a little gold plating. 50 Gold® will cover you for up to 750 insertion cycles.
Are the patch panels made with solderless PCB?
Punch-down termination requires up to 50 pounds of harsh force. This force
can break the solder joint between 110 and PCB. We only use solderless 110s.
Are the patch panels PoE rated?
If you are installing a PoE system, a PoE rating is required. Without it, you
risk damaging your equipment.
Not complying with FCC or TIA standards might prevent you from getting paid. Ask your data connectivity
vendor these questions:
TIA / ETL
Component Rated? Solderless PCB? 50 Gold® Rated? PoE Rated?
UL® / cUL® Listed No Intermittent Failure 50 Micro-inch Gold IEEE 802.3at PoE Plus
Rear 110-Type IDC 750 Plug-Jack Mating Cycles 100+ Re-termination RoHS Compliant
+++
Are You at Risk?
800-309-2322, CA