as a complete
UL rating 50 lb fixture (only)
MOUNTS FIXTURES SECURELY TO SUSPENDED CEILING GRID
LISTED • TESTED • ONE-PIECE, ASSEMBLED UNIT
Assemblies! Arlington’s all-metal, one-piece fixture box
ships ready to install
on a 24" suspended ceiling grid – no assembly required!
FS420SCL not only saves time (and money!), it’s tested,
listed to hold up to 50 lbs. as required by the 2014 NEC.
No more guesswork. Compare our one-piece fixture box
with separate components assembled in the field.
Using multiple, separate pieces for the installation;
bracket and box with wire attached is an untested,
unknown – not Listed for support.
• Position box anywhere along the bracket
• Costs less than field-assembled components
• For use with environmental air handling spaces
Arlington’s fan/fixture boxes offer the fastest, most secure
way to mount a fan or fixture. The box press-holds to a 2x4
where it stays firmly in place until the captive center screw
is tightened, mounting it directly to the joist.
No pieces to lose! All box and bracket installation screws
ship captive. Also included, an installed mud cover
and NM cable connector.
• Easy installation in
• For 1/2" and 5/8" drywall
• 2-HOUR FIRE RATING
FB415 10. 3 cu. inches
Installation screws for box and bracket ship captive
Gripping tangs hold box temporarily to joist
70 lb fan
Up to 200 lb fixture
FAN/FIXTURE BOX PRESS HOLD
EASY INSTALLATION...SECURE JOIST-MOUNT IN NEW CONSTRUCTION
Patented Made in USA
1_ 2 ad FB415 & FB426_1/2 pg ad LPCG 12/10/14 1:02 PM Page 1