NEW
800/233-4717 Arlington
NO TOOLS • EASY SNAP-IN INSTALLATION SAVES TIME!
FOR NEW OR RETROFIT INSTALLATIONS
Made in USA
©2014ArlingtonIndustrie
s, Inc.
Snap connector
onto installed
MC cable.
Arlington’s new one-piece RETROFIT SNAP2IT® fittings are
easy to use in OLD or NEW WORK installations, and handle
the widest variety of cables! They’re ideal for adding
additional circuits to a load center. And you get the same
labor-savings in a retrofit installation!
Easy snap-in installation - NO TOOLS. Install connector
into the knockout in an existing box, pulling cable/
conduit through the knockout. Slip the fitting onto the
cable, then snap the assembly into the box. That’s it...
a secure installation with no pullout.
Widest total cable ranges; Widest variety of cables
14/2 to 10/3 AC, MC, HCF, MC continuous corrugated
aluminum cable, MCI-A cables (steel and aluminum),
AC90, ACG90 and FLEX
40RAST
for RETROFIT
Snap assembly
into box. Done!
38RAST Connectors with Built-in Ground
38RASTG front 40RASTG back
Patent pending
for NEW and RETROFIT work
REV 1_ 2 ad Retrofit Snap2It_1/2 pg ad LPCG 12/11/15 11: 26 AM Page 1 800/233-4717 Arlington
LOW COST • ZINC
TO FIT SEVERAL CABLE SIZES
Save time and money! Arlington’s new, low cost MC cable
fittings – for dry locations only – are super-convenient
and cost-effective. They come with end stop bushings
that vary the size of the opening – ONE trade size fits
several cable sizes!
Changing end stop bushings is fast and easy. There’s no
need to remove the strap. Insert the bushing that works
the best with the cables you’re installing.
Our zinc diecast MC cable fittings reduce inventory, and
cost much less than steel or malleable iron fittings.
• Built-in end stop in fitting
© 2008 REV1113 Arlington Industries, Inc. Patented
IN MULTIPLE SIZES
8415
2" trade size
MC CABLE FITTINGS
Catalog Trade Cable O.D. Wire Bundle O.D. Conductor size
Number Size Min Max Min Max of Conductors* (AWG/KCMIL)
8412 1" .780 1.120 .660 1.000 6/3, 6/4, 4-3, 4-4, 2-3, 2-4, 1-3
8413 1-1/4"
1.000 1.460 .870 1.370 2-3, 2-4, 1-3, 1-4, 1/0-3, 1/0-4, 2/0-3, 2/0-4, 3/0-3
8414 1-1/2"
1.360 1.770 1.250 1.590 2/0-4, 3/0-3, 3/0-4, 4/0-3, 4/0-4, 250-3, 250-4
8415 2"
1.700 2.200 1.550 2.050 250-4, 300-4, 350-3, 350-4, 500-3
8416 2-1/2"
2.100 2.700 1.950 2.400 500-3, 500-4, 600-3, 600-4, 750-3
8417 3"
2.500 3.300 2.350 3.000 600-4, 750-3, 750-4
*Examples of 3- and 4-conductor
cables accommodated.
C US Made in USA
1_ 2 ad MC Cable_1/2 pg ad LPCG 11/4/13 12: 11 PM Page 1
Save time and money with Arlington’s liquid-tight,
concrete-tight zinc fittings for PVC jacketed MC cable.
ONE fitting FITS MULTIPLE cable sizes!
LTMC50 ships ready to install on #12 or #14 PVC jacketed
MC cable. To install on #10 cable, use the WHITE grommet
and washer. It’s FAST and EASY!
Try the NEW SIZES too!
Because they fit more than one cable size, these fittings
reduce inventory, saving you the cost of stocking
several different fittings.
©
2015
Arling
ton
Indust
ries,
Inc.
800/233-4717 • www.aifittings.com Arlington
LIQUID-TIGHT • CONCRETE-TIGHT FITTINGS FOR Made in USA
Ideal for
Parking Decks
Construction 1/2” LTMC50
ONE FITTING FITS MULTIPLE MC JACKETED CABLE SIZES
UL Listed
Catalog Cable Ranges
Number (Armor Diameter)
LTMC50 .415” - .565”
LTMC507 .550” - .730” goes into 1/2” KO
LTMC75 .725” - .890” goes into 3/4” KO
NEW
NEW
NEW
SIZES!
MC JACKETED CABLE