52 ELECTRICALCONTRACTOR | FEB. 17 | WWW.ECMAG.COM
TOOLS & ACCESSORIES
1 CUT-IN SAW Labor Saving Systems Inc.’s single-gang, Q-bit
cut-in saw for multitools is 23/8 in. wide and 33/4 in. tall. It fits most
multitools, turning them into a square saw blade for cutting into
drywall. It is designed to not cut wires. It is intended to produce
less dust and leave cleaner edges than traditional drywall saws.
2 TOOL TRACKER Milwaukee Tool’s water- and dust-tight
Tick tool and equipment tracker enables users to track
and record information about their inventory through the
Milwaukee One-Key app. Brand agnostic, it can be attached to
anything using glue, screws, rivets or straps. Each Tick is laser-engraved with a serial number, so users can identify and assign
3 DRIVER Wiha Tools’ 26-in- 1 ultra driver includes 13 double-end bits, which have 26 of the most used tip sizes, including
slotted, Phillips, square and hex tips. The driver also has a high-torque, cushion-grip handle with a spring-loaded cartridge and
a standard 1/4-in. driver, locking bit holder.
4 TDR Megger’s TDR2050 dual-channel, dual-trace time-domain
reflectometer is designed to locate faults on paired metallic
cables. It has a built-in, 600V, CAT IV input protection filter,
providing users the ability to connect to known live lines. It
has a resolution range from 0.1m/0.3 ft. to 20 km/65,000 ft,
depending on the velocity factor selected and the cable type.
5 TOOL WORKSTATION Tool Mule’s Big Tool Mule
workstation is made of an aluminum sheath over a wood core.
It features tool slots and a removable tool pan. It is designed
for use on scissor lifts to eliminate materials and tools storage
on platforms, reducing trip hazards and lower back injuries. It is
available in 24- and 30-in. sizes.
6 MULTIMETER Southwire Tools’ Bluetooth-enabled
multimeter, in combination with Southwire’s Mapp mobile
app, enables users to view, record and share readings on their
smartphone. It has an IP- 67 waterproof and dust-tight housing,
true rms and Low Z readings, backlit controls, a built-in work
light and a magnetic hanging strap.
7 SCREWGUN De Walt’s 20V Max XR Versa-Clutch
adjustable torque screwgun is designed to determine the
proper torque needed to drive fasteners. The cordless
screwgun is ergonomically designed to balance from front
to back. It has a brushless motor, a rubber over-mold, an LED
worklight and a belt hook.
8 FIBER CONNECTOR CLEANER Sticklers’ Cassette
Cleanclicker disposable, end-face cassette cleaner can be used
as a dry wipe or with “wet-dry” cleaning. It cleans all female
MPO connectors of any fiber and all standard single and duplex
fiber connector assemblies. It has a high-absorbency, manually
controlled cleaning ribbon made of microwoven fabric, a
translucent plastic housing and a shutterless cleaning window.