NO TOOLS • EASY SNAP-IN INSTALLATION SAVES TIME!
FOR NEW OR RETROFIT INSTALLATIONS
SNAP2IT® CONNECTORS Made in USA
Arlington’s new one-piece RETROFIT SNAP2IT® fittings are
easy to use in OLD or NEW WORK installations, and handle
the widest variety of cables! They’re ideal for adding
additional circuits to a load center. And you get the
same labor-savings in a retrofit installation!
Easy snap-in installation - NO TOOLS. Install connector
into the knockout in an existing box, pulling cable/
conduit through the knockout. Slip the fitting onto the
cable, then snap the assembly into the box. That’s it...
a secure installation with no pullout.
Widest total cable ranges; Widest variety of cables
14/2 to 10/3 – AC, MC, HCF, MC continuous corrugated
aluminum cable, MCI-A cables (steel and aluminum),
AC90, ACG90 and FLEX.
into box. Done!
REV2 1_ 2 ad Retrofit Snap2It.qxp_1/2 pg ad LPCG 8/2/16 5: 35 PM Page 1
Our non-conductive plastic UL/CSA Listed Box Extenders
extend set back metal or non-metallic electrical boxes
up to 1-1/2". They level and support a wiring device.
There’s no need to tape the sides of a receptacle to
prevent arcing in a metal box.
NEW! TWO-GANG style with larger flange to cover
miscut openings. Perfect for both midi and max plates –
the flange is trimmable for use with standard cover plates.
Both ‘larger flange’ versions cost the same as our
‘regular’ BE1 and two-gang BE2
so if you normally
use a midi plate
these are the
• Complies w/ NEC
(314.20) for set back boxes
• 2-hour fire rating
• Offered in a variety of styles,
© 2016 Arlington Industries, Inc. Patented/Other patents pending
Made in USA
Trimmable to fit
standard wall plates