Arlington’s LIQUID-TIGH T CONNECTORS
offer the fastest, easiest way to install non-metallic
liquid-tight conduit, type B. All ship fully assembled and
ready to use, with no disassembly required!
Available in straight and 90 degree, our one-piece
Snap2It® PUSH ON connectors save time and
eliminate lost pieces. Simply push onto non-metallic
conduit. NO TOOLS. Done! THEY COST THE SAME
but PUSH ONs SAVE 17 SECONDS per connector
vs 57 seconds for multi-piece connectors.
Our ZERO to 90 connectors, push on to conduit and
adjust to fit any angle by loosening the center nut,
twisting connector to correct angle and retightening.
*They eliminate the need to stock a ‘ 45’!
UV Rated for long outdoor life
Reliable liquid-tight seal
We do offer MULTI-PIECE liquid-tight connectors too.
The NO SPIN ferrule allows installers to secure
connector to conduit while fully assembled.
Just loosen the nut and screw onto conduit.
Arlington
www.aifittings.com • Scranton, PA 18517 • 800/233-4717 Patented
ONE-PIECE
PUSH ONs
SAVE TIME
NMLT5
©2015 Arlington
PUSH ON DONE!
PUSH ON
ZERO TO 90
MULTI-PIECE
NMLT590
PUSH ON 90°
NMLT905
CONNECTORS
NON-METALLIC STRAIGHT • 90° • ZERO TO 90°™
SAVE TIME • NO DISASSEMBLY! • FOR NON-METALLIC LIQUID-TIGHT CONDUIT, TYPE B
Straight
NMLT50
ZERO to 90
NMLT5090
Nut No-spin ferrule
...loosen to adjust angle
PUSH ON TO CONDUIT
ADJUST TO ANY ANGLE 0° TO 90°
PUSH ON