Our UL/CSA Listed Box Extenders extend set back metal
or non-metallic electrical boxes up to 1-1/2".
Made of heavy-duty, non-conductive plastic, they level and
support the wiring device. Plus, there’s no need to tape the
sides of a receptacle to prevent arcing in a metal box.
Our newest box extender, the BE1X, has a slightly larger
flange that covers miscut wall material and accommodates
midi, maxi – or standard cover plates.
It costs the same as our
‘regular’ single gang BE1
so if you normally use a
midi plate this is the
box extender for you!
• Complies w/ NEC 2014
(314.20) for set back
• 2-hour fire rating
• In single and multiple gangs;
and round for round or
EXTEND SET BACK ELECTRICAL BOXES UP TO 1-1/2 INCHES
© 2014 Arlington Industries, Inc. Patented Made in USA
Larger Perforated Flange
BE1X Now Trimmable to
fit standard wall plates
REV1_2p BE1 vs BE1X_1/2 pg ad LPCG 1/13/15 12: 53 PM Page 1
#6 to #2 AWG copper or aluminum,
solid or stranded
#14 to #4
RELIABLE INTERSYSTEM BONDING
IN ZINC OR BRONZE • WITH OR WITHOUT CONDUIT ADAPTER
GB5 zinc with cover
Grounding Bridge provides
reliable intersystem bonding
between power and
Available in zinc and
bronze they handle
multiple hookups of
telephone, CATV, satellite.
• Four termination points;
more than required by the NEC
• All meet bonding requirements
of 250.94 in the 2008, 2011, 2014 NEC
• For indoor or outdoor use;
fast, simple installation
• Textured, paintable plastic cover
• Easy access for inspections
Available in bronze for large
#6 to 250 MCM conductors!
Meets NEC 2014
cover and screw...
bulk-packaged to lower cost
zinc 1_ 2 p Ground Bridge_1/2 pg ad LPCG 12/9/14 4: 24 PM Page 1