One-piece IN BOX™, the recessed
electrical box for exterior use,
eliminates installing an electrical box
and bubble cover assembly, so you
save big on labor and materials.
IN BOX installs in the wall –
so less shows outside.
Fewer parts to handle.
Time savings. A great-looking job.
Get it all in Arlington’s IN BOX!
• Non-metallic, 22.0 cu. in. box
with EXTRA-DUTY weatherproof-in-use clear or white cover
• Accepts single-gang devices;
ONE-PIECE. SAVES TIME – LOOKS GREAT!
LOW PROFILE, EXTRA DUTY COVER
Made in USA ®
JUST FOR 1-1/2" and
FOAM WALL SYSTEMS!
For 1-1/2" wall systems,
including foam, DBVME1
has fixed, built-in flange -
eliminates separate flashing.
Adjustable to fit
ANY foam board
on 2-3/4" to 5" wall, or
custom stucco finishes
from 1/4" to 2-1/2" thick.
MEETS 2014 NEC
Section 406.9 for
protection of exterior
outlets which require
the use of extra-duty
cover for all outdoor 15
or 20 AMP receptacles. CONTINUOUS
1_ 2 ad HORIZ Vegas InBox.qxp_1/2 pg ad LPCG 2/15/17 4:03 PM Page 1
CONCRETE PIPE SLEEVE NON-METALLIC • VENTED FOR EASIER STACKABILITY
THE EASY, ECONOMICAL WAY TO SLEEVE THROUGH CONCRETE POURS!
Our Concrete Pipe Sleeves offer the economical way to sleeve
through a concrete pour so that cable and conduit
can run easily from one floor to the next.
They eliminate costly core drilling and permit
positioning of the hole prior to pouring concrete,
without the need to cut holes in the form.
Our concrete pipe sleeves attach with nails or screws.
• Stackable up to 23" for extra deep pours
• Vented to keep wet pipe sleeves from sticking together
• Available in multiple hole sizes: 1-1/2" • 2" • 3" • 4" • 5" • 6"
Made in USA
for 4" hole
After concrete sets
cut sleeve off,
flush with surface.
Insert conduit into sleeve.
1_ 2 ad CPS40_1/2 pg ad LPCG 4/11/14 10: 51 AM Page 1