TESTERS AND METERS
1 TESTER Platinum Tools’ Fault Trapper TFT100 smart tester detects the type of fault, includes the time stamp, and locates the position
of an electrical event that caused intermittent/persistent circuit breaker trips and no-fault-found conditions. It captures time and
distance to opens, shorts and arc faults, saving the event information in memory. It also allows unattended monitoring.
2 CLAMP METER Hioki’s True rms 600A AC/DC clamp meter measures current, voltage, resistance, frequency and voltage detection.
It simultaneously measures inrush current in rms and crest values. It has a – 25 to 65°C operating temperature range. The high-voltage
DC measurement capability of up to 1,700V is useful for the clamp maintenance inspections of electrical and solar power equipment.
3 MULTIMETER Southwire Tools’ 11060S auto-ranging multimeter offers 1,000V input protection, IP- 67 waterproof and dustproof
housing and a CAT IV safety rating. Its 11 functions include capacitance, frequency, duty cycle and temperature. It has a backlit,
4,000-count display and a magnetic hanging strap.
4 CLAMP METER Flir’s CM174 imaging 600A AC/DC clamp meter has infrared guided measurement technology powered by an
integrated Flir Lepton thermal-imaging sensor to find the precise location of a potential electrical problem. It safely identifies dangerous
and unknown problem areas.
5 SMART METER Ideal Industries’ 61-096 split-jaw smart meter automatically senses and displays AC/DC volts, AC amperes, resistance
and continuity and measures 0–200A AC, 0–750V AC, 0– 1,000V DC and 0– 2,000 ohms. The replaceable test leads are integral.
6 MULTIMETER AEMC’s handheld multimeters measure a variety of electrical and physical quantities including voltage (AC and DC),
resistance, capacitance, frequency and temperature and are rated to 600V CAT III. They perform continuity checks, voltage detection
and diode testing (including forward bias voltage). Measurement features include auto-range mode and a data-hold function.
7 RESISTANCE TESTER Megger’s DET24C clamp-on ground-resistance tester has flat core ends to prevent dirt buildup and a built-in filter function for electrically noisy environments. It has time- and date-stamped stored test results and ultralong battery life.
8 OTDR AFL’s pocket-sized FlexScan handheld OTDR provides fast, accurate fiber optic network characterization and fault location. It
combines SmartAuto data acquisition with event analysis and LinkMap display. FlexScan enables users to troubleshoot faulty optical
networks and completely characterize newly installed networks.
9 CLAMP METERS Klein Tools’ test and measurement clamp meters come with test leads, batteries and a nylon carrying case.
Models include digital clamp meters CL110, CL210 and auto-ranging True rms meter CL310. The auto-ranging Trms digital clamp meter
CL600, 700 and 800 Tough Meter have similar features.